[PATCH v4 1/7] ARM: dts: imx6q(dl): Move 'port' nodes under 'ports' for HDMI encoder
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: 2021-01-14 06:45:43
Also in:
dri-devel, linux-renesas-soc
Subsystem:
the rest · Maintainer:
Linus Torvalds
In preparation for the conversion of the DWC HDMI TX device tree bindings to YAML, move the HDMI encoder's 'port' nodes under a 'ports' node. The 'ports' node is optional in the OF graph implementation, but YAML bindings require it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- arch/arm/boot/dts/imx6q.dtsi | 20 +++++++++++--------- arch/arm/boot/dts/imx6qdl.dtsi | 25 ++++++++++++++----------- 2 files changed, 25 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 5277e3903291..8d209c1b3ca7 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi@@ -406,19 +406,21 @@ ipu2_csi1_mux_to_ipu2_csi1: endpoint { &hdmi { compatible = "fsl,imx6q-hdmi"; - port@2 { - reg = <2>; + ports { + port@2 { + reg = <2>; - hdmi_mux_2: endpoint { - remote-endpoint = <&ipu2_di0_hdmi>; + hdmi_mux_2: endpoint { + remote-endpoint = <&ipu2_di0_hdmi>; + }; }; - }; - port@3 { - reg = <3>; + port@3 { + reg = <3>; - hdmi_mux_3: endpoint { - remote-endpoint = <&ipu2_di1_hdmi>; + hdmi_mux_3: endpoint { + remote-endpoint = <&ipu2_di1_hdmi>; + }; }; }; };
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 6f59a99cbe82..82e01ce026ea 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi@@ -182,8 +182,6 @@ gpmi: nand-controller@112000 { }; hdmi: hdmi@120000 { - #address-cells = <1>; - #size-cells = <0>; reg = <0x00120000 0x9000>; interrupts = <0 115 0x04>; gpr = <&gpr>;
@@ -192,19 +190,24 @@ hdmi: hdmi@120000 { clock-names = "iahb", "isfr"; status = "disabled"; - port@0 { - reg = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; - hdmi_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_hdmi>; + port@0 { + reg = <0>; + + hdmi_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_hdmi>; + }; }; - }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - hdmi_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_hdmi>; + hdmi_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_hdmi>; + }; }; }; };
--
Regards,
Laurent Pinchart