Re: arm: sunxi: &83t: WARNING: CPU: 2 PID: 57 at drivers/thermal/thermal_core.c:563 thermal_zone_device_update

Hi,

On Sun, Jan 31, 2021 at 12:54 AM Corentin Labbe
[off-list ref] wrote:

Hello

When booting next-20210128, I got the following warning on by bpim3
    6.148421] ------------[ cut here ]------------
[    6.153145] WARNING: CPU: 2 PID: 57 at drivers/thermal/thermal_core.c:563 thermal_zone_device_update+0x134/0x154
[    6.163378] 'thermal_zone_device_update' must not be called without 'get_temp' ops set
[    6.171300] Modules linked in: sha256_generic libsha256
[    6.176553] CPU: 2 PID: 57 Comm: kworker/2:1 Not tainted 5.11.0-rc1-00042-gf3788af62cfe #399
[    6.184984] Hardware name: Allwinner A83t board
[    6.189517] Workqueue: events deferred_probe_work_func
[    6.194686] [<c010d568>] (unwind_backtrace) from [<c010a060>] (show_stack+0x10/0x14)
[    6.202438] [<c010a060>] (show_stack) from [<c07e156c>] (dump_stack+0x98/0xac)
[    6.209666] [<c07e156c>] (dump_stack) from [<c07df02c>] (__warn+0xc0/0xd8)
[    6.216545] [<c07df02c>] (__warn) from [<c07df0dc>] (warn_slowpath_fmt+0x98/0xc0)
[    6.224030] [<c07df0dc>] (warn_slowpath_fmt) from [<c0630384>] (thermal_zone_device_update+0x134/0x154)
[    6.233426] [<c0630384>] (thermal_zone_device_update) from [<c0630918>] (__thermal_cooling_device_register+0x334/0x35c)
[    6.244204] [<c0630918>] (__thermal_cooling_device_register) from [<c0633ea0>] (__cpufreq_cooling_register.constprop.0+0x184/0x294)
[    6.256026] [<c0633ea0>] (__cpufreq_cooling_register.constprop.0) from [<c0633ff0>] (of_cpufreq_cooling_register+0x40/0x7c)
[    6.267153] [<c0633ff0>] (of_cpufreq_cooling_register) from [<c064cb44>] (cpufreq_online+0x2b4/0x8f4)
[    6.276379] [<c064cb44>] (cpufreq_online) from [<c064d200>] (cpufreq_add_dev+0x6c/0x78)
[    6.284383] [<c064d200>] (cpufreq_add_dev) from [<c04f7a98>] (subsys_interface_register+0xa4/0xf0)
[    6.293344] [<c04f7a98>] (subsys_interface_register) from [<c064b664>] (cpufreq_register_driver+0x144/0x2dc)
[    6.303169] [<c064b664>] (cpufreq_register_driver) from [<c064de34>] (dt_cpufreq_probe+0x298/0x3b8)
[    6.312215] [<c064de34>] (dt_cpufreq_probe) from [<c04fb540>] (platform_probe+0x5c/0xb8)
[    6.320313] [<c04fb540>] (platform_probe) from [<c04f9374>] (really_probe+0x1dc/0x3b8)
[    6.328231] [<c04f9374>] (really_probe) from [<c04f95ac>] (driver_probe_device+0x5c/0xb4)
[    6.336406] [<c04f95ac>] (driver_probe_device) from [<c04f778c>] (bus_for_each_drv+0x84/0xc8)
[    6.344928] [<c04f778c>] (bus_for_each_drv) from [<c04f9124>] (__device_attach+0xe8/0x154)
[    6.353189] [<c04f9124>] (__device_attach) from [<c04f8440>] (bus_probe_device+0x84/0x8c)
[    6.361365] [<c04f8440>] (bus_probe_device) from [<c04f88d4>] (deferred_probe_work_func+0x64/0x90)
[    6.370321] [<c04f88d4>] (deferred_probe_work_func) from [<c0134b98>] (process_one_work+0x1dc/0x438)
[    6.379456] [<c0134b98>] (process_one_work) from [<c0135050>] (worker_thread+0x25c/0x55c)
[    6.387632] [<c0135050>] (worker_thread) from [<c013b7b4>] (kthread+0x124/0x150)
[    6.395032] [<c013b7b4>] (kthread) from [<c0100150>] (ret_from_fork+0x14/0x24)
[    6.402256] Exception stack(0xc12d1fb0 to 0xc12d1ff8)
[    6.407307] 1fa0:                                     00000000 00000000 00000000 00000000
[    6.415478] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    6.423648] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    6.430301] ---[ end trace bd63a5c976f3611c ]---

I bisected the problem to
ARM: dts: sunxi: Remove thermal zones without trip points

Reverting this commit remove the warning.

The thermal subsystem seems to require a thermal zone be present for each
thermal sensor that is registered.

So maybe a better solution is not to remove the thermal zones without trip
points, but just add the standard passive and critical trip points based
on the SoC's thermal limits.


ChenYu