[PATCH v2 4/5] arm64: dtb: qcom: qrb5165-rb5: add bridge@0,0 to power up qca6391 chip
From: Dmitry Baryshkov <hidden>
Date: 2021-01-28 17:55:37
Also in:
linux-arm-msm, linux-pci, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
If QCA6391 chip (connected to PCIe0) is not powered at the PCIe probe time, PCIe0 bus probe will timeout and the device will not be detected. So use qca6391 as pcie0's bridge power-domain. This allows us to make sure that QCA6391 chip is powered on before PCIe0 probe happens. Signed-off-by: Dmitry Baryshkov <redacted> --- arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 2b0c1cc9333b..b39a9729395f 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts@@ -581,6 +581,18 @@ &pcie0 { wake-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie0_default_state>; + + bridge@0,0 { + compatible = "pci17cb,010b"; + reg = <0 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + /* Power on QCA639x chip sitting behind this bridge. */ + power-domains = <&qca6391>; + }; }; &pcie0_phy {
--
2.29.2