Thread (24 messages) flat view 24 messages, 6 authors, 2021-03-15
STALE2021d

Revision v1 of 11 in this series.

Revisions (11)
  1. v1 current
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v4 [diff vs current]
  5. v5 [diff vs current]
  6. v6 [diff vs current]
  7. v7 [diff vs current]
  8. v8 [diff vs current]
  9. v9 [diff vs current]
  10. v10 [diff vs current]
  11. v11 [diff vs current]

[PATCH net-next 4/8] net: dsa: microchip: add support for phylink management

From: Prasanna Vengateshan <hidden>
Date: 2021-01-28 06:46:37
Also in: lkml, netdev
Subsystem: microchip ksz series ethernet switch driver, networking drivers, networking [dsa], the rest · Maintainers: Woojung Huh, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds

Support for phylink_validate() and reused KSZ commmon API for
phylink_mac_link_down() operation

Signed-off-by: Prasanna Vengateshan <redacted>
---
 drivers/net/dsa/microchip/lan937x_main.c | 40 ++++++++++++++++++++++++
 1 file changed, 40 insertions(+)
diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c
index 41f7f5f8f435..b38735e36aef 100644
--- a/drivers/net/dsa/microchip/lan937x_main.c
+++ b/drivers/net/dsa/microchip/lan937x_main.c
@@ -327,6 +327,44 @@ static int lan937x_get_max_mtu(struct dsa_switch *ds, int port)
 	return FR_MAX_SIZE;
 }
 
+static void lan937x_phylink_validate(struct dsa_switch *ds, int port,
+				     unsigned long *supported,
+			  struct phylink_link_state *state)
+{
+	struct ksz_device *dev = ds->priv;
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+
+	if (phy_interface_mode_is_rgmii(state->interface) ||
+	    state->interface == PHY_INTERFACE_MODE_SGMII ||
+		state->interface == PHY_INTERFACE_MODE_RMII ||
+		state->interface == PHY_INTERFACE_MODE_MII ||
+		lan937x_is_internal_tx_phy_port(dev, port)) {
+		phylink_set(mask, 10baseT_Half);
+		phylink_set(mask, 10baseT_Full);
+		phylink_set(mask, 100baseT_Half);
+		phylink_set(mask, 100baseT_Full);
+		phylink_set(mask, Autoneg);
+		phylink_set_port_modes(mask);
+		phylink_set(mask, Pause);
+		phylink_set(mask, Asym_Pause);
+	}
+	/*  For RGMII & SGMII interfaces */
+	if (phy_interface_mode_is_rgmii(state->interface) ||
+	    state->interface == PHY_INTERFACE_MODE_SGMII) {
+		phylink_set(mask, 1000baseT_Full);
+	}
+	/* For T1 PHY */
+	if (lan937x_is_internal_t1_phy_port(dev, port)) {
+		phylink_set(mask, 100baseT_Full);
+		phylink_set_port_modes(mask);
+	}
+
+	bitmap_and(supported, supported, mask,
+		   __ETHTOOL_LINK_MODE_MASK_NBITS);
+	bitmap_and(state->advertising, state->advertising, mask,
+		   __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
 const struct dsa_switch_ops lan937x_switch_ops = {
 	.get_tag_protocol	= lan937x_get_tag_protocol,
 	.setup			= lan937x_setup,
@@ -339,6 +377,8 @@ const struct dsa_switch_ops lan937x_switch_ops = {
 	.port_fast_age		= ksz_port_fast_age,
 	.port_max_mtu		= lan937x_get_max_mtu,
 	.port_change_mtu	= lan937x_change_mtu,
+	.phylink_validate	= lan937x_phylink_validate,
+	.phylink_mac_link_down	= ksz_mac_link_down,
 };
 
 int lan937x_switch_register(struct ksz_device *dev)
-- 
2.25.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help