Re: [PATCH] cmd_dtc: Enable generation of device tree symbols

+frank

On 1/26/21 2:43 AM, Geert Uytterhoeven wrote:

Hi Uwe,

On Tue, Jan 26, 2021 at 8:21 AM Uwe Kleine-König [off-list ref] wrote:

quoted

And then I learned with hints from Rob and Geert that symbols are not
really necessary for overlays, you just cannot use named labels. But
using

        target-path = "/soc/i2c@23473245";

or

        target = <&{/soc/i2c@23473245}>;

instead of

        target = <&i2c1>;

works fine. (And if you need to add a phandle the &{/path/to/node}
construct should work, too (but I didn't test).) Using labels is a tad
nicer, but the problem I wanted to address with my patch now has a known
different solution.

Please don't use "target" and "target-path".  Since the introduction of
sugar syntax support in v4.15[1], you can just use "&label", like in a normal
DTS file.  Paths do need the special "&{/path/to/node}" syntax instead
of "/path/to/node", though.

As usual, you can find lots of examples of DT overlays in my repo[2].

[1] commit 4201d057ea91c3d6 ("scripts/dtc: Update to upstream version
v1.4.5-3-gb1a60033c110")
[2] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/renesas-overlays

Gr{oetje,eeting}s,

                        Geert