Re: [PATCH v2 4/4] phy: phy-hi3670-usb3: move driver from staging into phy

On Tue, Jan 19, 2021 at 4:26 AM Mauro Carvalho Chehab
[off-list ref] wrote:

Em Thu, 14 Jan 2021 19:47:31 -0600
Rob Herring [off-list ref] escreveu:

quoted

On Thu, Jan 14, 2021 at 06:35:44PM +0100, Mauro Carvalho Chehab wrote:

quoted

The phy USB3 driver for Hisilicon 970 (hi3670) is ready
for mainstream. Mode it from staging into the main driver's
phy/ directory.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../bindings/phy/phy-hi3670-usb3.yaml         |  72 ++
 MAINTAINERS                                   |   9 +-
 drivers/phy/hisilicon/Kconfig                 |  10 +
 drivers/phy/hisilicon/Makefile                |   1 +
 drivers/phy/hisilicon/phy-hi3670-usb3.c       | 668 ++++++++++++++++++
 drivers/staging/hikey9xx/Kconfig              |  11 -
 drivers/staging/hikey9xx/Makefile             |   2 -
 drivers/staging/hikey9xx/phy-hi3670-usb3.c    | 668 ------------------
 drivers/staging/hikey9xx/phy-hi3670-usb3.yaml |  72 --
 9 files changed, 759 insertions(+), 754 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3670-usb3.yaml
 create mode 100644 drivers/phy/hisilicon/phy-hi3670-usb3.c
 delete mode 100644 drivers/staging/hikey9xx/phy-hi3670-usb3.c
 delete mode 100644 drivers/staging/hikey9xx/phy-hi3670-usb3.yaml

diff --git a/Documentation/devicetree/bindings/phy/phy-hi3670-usb3.yaml b/Documentation/devicetree/bindings/phy/phy-hi3670-usb3.yaml
new file mode 100644
index 000000000000..125a5d6546ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-hi3670-usb3.yaml

@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,hi3670-usb3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Kirin970 USB PHY
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Blank line.

Ok.

quoted

quoted

+description: |+
+  Bindings for USB3 PHY on HiSilicon Kirin 970.
+
+properties:
+  compatible:
+    const: hisilicon,hi3670-usb-phy
+
+  "#phy-cells":
+    const: 0
+
+  hisilicon,pericrg-syscon:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: phandle of syscon used to control iso refclk.
+
+  hisilicon,pctrl-syscon:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: phandle of syscon used to control usb tcxo.
+
+  hisilicon,sctrl-syscon:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: phandle of syscon used to control phy deep sleep.
+
+  hisilicon,eye-diagram-param:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Eye diagram for phy.
+
+  hisilicon,tx-vboost-lvl:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TX level vboost for phy.
+
+required:
+  - compatible
+  - hisilicon,pericrg-syscon
+  - hisilicon,pctrl-syscon
+  - hisilicon,sctrl-syscon
+  - hisilicon,eye-diagram-param
+  - hisilicon,tx-vboost-lvl
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      usb3_otg_bc: usb3_otg_bc@ff200000 {
+        compatible = "syscon", "simple-mfd";
+        reg = <0x0 0xff200000 0x0 0x1000>;
+
+        usb_phy {

Is there a contiguous register region for this sub-block? If so, add
'reg' even though Linux doesn't need it currently.

No. The driver uses 4 syscon regions in order to access the needed
registers:

I meant just for the parent device node. I assume these are the 'main'
registers? If not, then maybe it should be a child of one of the other
syscons.

'reg' would just be for documentation ATM. However, if the subblock
was reused on another chip, but at a different offset then reg would
become useful. You could handle that with a fixed offset when 'reg' is
missing, but adding it later would be too late.

Rob