On Thu, 21 Jan 2021 16:56:58 +0100, Mike Looijmans wrote:

This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
the accelerometer part.

Signed-off-by: Mike Looijmans <redacted>

---

Changes in v7:
Add additionalProperties
Change bmi088_accel to bmi088-accel
Add interrupt-names and adjust description

Changes in v6:
I't been almost a year since the last commit, sorry...
Fixed the yaml errors
Add interrupt, vdd and vddio properties

Changes in v5:
submit together with driver code as patch series

Changes in v2:
convert to yaml format

 .../bindings/iio/accel/bosch,bmi088.yaml      | 66 +++++++++++++++++++
 1 file changed, 66 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.example.dt.yaml: bmi088-accel@1: 'spi-max-frequency' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml

See https://patchwork.ozlabs.org/patch/1429940

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.