@@ -1,39 +0,0 @@
-Synopsys DesignWare AXI DMA Controller
-
-Required properties:
-- compatible: "snps,axi-dma-1.01a"
-- reg: Address range of the DMAC registers. This should include
-  all of the per-channel registers.
-- interrupt: Should contain the DMAC interrupt number.
-- dma-channels: Number of channels supported by hardware.
-- snps,dma-masters: Number of AXI masters supported by the hardware.
-- snps,data-width: Maximum AXI data width supported by hardware.
-  (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
-- snps,priority: Priority of channel. Array size is equal to the number of
-  dma-channels. Priority value must be programmed within [0:dma-channels-1]
-  range. (0 - minimum priority)
-- snps,block-size: Maximum block size supported by the controller channel.
-  Array size is equal to the number of dma-channels.
-
-Optional properties:
-- snps,axi-max-burst-len: Restrict master AXI burst length by value specified
-  in this property. If this property is missing the maximum AXI burst length
-  supported by DMAC is used. [1:256]
-
-Example:
-
-dmac: dma-controller@80000 {
-	compatible = "snps,axi-dma-1.01a";
-	reg = <0x80000 0x400>;
-	clocks = <&core_clk>, <&cfgr_clk>;
-	clock-names = "core-clk", "cfgr-clk";
-	interrupt-parent = <&intc>;
-	interrupts = <27>;
-
-	dma-channels = <4>;
-	snps,dma-masters = <2>;
-	snps,data-width = <3>;
-	snps,block-size = <4096 4096 4096 4096>;
-	snps,priority = <0 1 2 3>;
-	snps,axi-max-burst-len = <16>;
-};

@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/snps,dw-axi-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare AXI DMA Controller
+
+maintainers:
+  - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+
+description:
+  Synopsys DesignWare AXI DMA Controller DT Binding
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - snps,axi-dma-1.01a
+
+  reg:
+    items:
+      - description: Address range of the DMAC registers
+
+  reg-names:
+    items:
+      - const: axidma_ctrl_regs
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: core-clk
+      - const: cfgr-clk
+
+  '#dma-cells':
+    const: 1
+
+  dma-channels:
+    minimum: 1
+    maximum: 8
+
+  snps,dma-masters:
+    description: |
+      Number of AXI masters supported by the hardware.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  snps,data-width:
+    description: |
+      AXI data width supported by hardware.
+      (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6]
+
+  snps,priority:
+    description: |
+      Channel priority specifier associated with the DMA channels.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  snps,block-size:
+    description: |
+      Channel block size specifier associated with the DMA channels.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  snps,axi-max-burst-len:
+    description: |
+      Restrict master AXI burst length by value specified in this property.
+      If this property is missing the maximum AXI burst length supported by
+      DMAC is used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 256
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - '#dma-cells'
+  - dma-channels
+  - snps,dma-masters
+  - snps,data-width
+  - snps,priority
+  - snps,block-size
+
+additionalProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/interrupt-controller/arm-gic.h>
+     #include <dt-bindings/interrupt-controller/irq.h>
+     /* example with snps,dw-axi-dmac */
+     dmac: dma-controller@80000 {
+         compatible = "snps,axi-dma-1.01a";
+         reg = <0x80000 0x400>;
+         clocks = <&core_clk>, <&cfgr_clk>;
+         clock-names = "core-clk", "cfgr-clk";
+         interrupt-parent = <&intc>;
+         interrupts = <27>;
+         #dma-cells = <1>;
+         dma-channels = <4>;
+         snps,dma-masters = <2>;
+         snps,data-width = <3>;
+         snps,block-size = <4096 4096 4096 4096>;
+         snps,priority = <0 1 2 3>;
+         snps,axi-max-burst-len = <16>;
+     };