Hi Tom,

	Thanks for the review.
Please find my response inline.

-----Original Message-----
From: Tom Rix <trix@redhat.com>
Sent: Friday, January 15, 2021 11:56 PM
To: Nava kishore Manne <redacted>; mdf@kernel.org;
robh+dt@kernel.org; Michal Simek [off-list ref]; linux-
fpga@vger.kernel.org; devicetree@vger.kernel.org; linux-arm-
kernel@lists.infradead.org; linux-kernel@vger.kernel.org
Cc: git <redacted>; chinnikishore369@gmail.com
Subject: Re: [PATCH 2/2] fpga: Add support for Xilinx DFX AXI Shutdown
manager


On 1/14/21 5:34 PM, Nava kishore Manne wrote:

quoted

This patch adds support for Xilinx Dynamic Function eXchange(DFX) AXI
shutdown manager IP. It can be used to safely handling the AXI traffic
on a Reconfigurable Partition when it is undergoing dynamic
reconfiguration and there by preventing system deadlock that may occur
if AXI transactions are interrupted during reconfiguration.

PR-Decoupler and AXI shutdown manager are completely different IPs.
But both the IP registers are compatible and also both belong to the
same sub-system (fpga-bridge).So using same driver for both IP's.

Signed-off-by: Nava kishore Manne <redacted>
---
 drivers/fpga/xilinx-pr-decoupler.c | 35
++++++++++++++++++++++++++----

It looks like the copyright is wrong, please review spelling of Xilix

 * Copyright (c) 2017, Xilix Inc

Will fix in v2.

quoted

 1 file changed, 31 insertions(+), 4 deletions(-)

diff --git a/drivers/fpga/xilinx-pr-decoupler.c

b/drivers/fpga/xilinx-pr-decoupler.c
index 7d69af230567..c95f3d065ccb 100644

--- a/drivers/fpga/xilinx-pr-decoupler.c
+++ b/drivers/fpga/xilinx-pr-decoupler.c

@@ -19,10 +19,15 @@
 #define CTRL_OFFSET		0

 struct xlnx_pr_decoupler_data {
+	const struct xlnx_config_data *ipconfig;
 	void __iomem *io_base;
 	struct clk *clk;
 };

+struct xlnx_config_data {
+	char *name;
+};

Move xlnx_config_data above xlnx_pr_decouple_data.

Will fix in v2.

could you 'const' char *name ?

Will fix in v2.

quoted

+
 static inline void xlnx_pr_decoupler_write(struct xlnx_pr_decoupler_data

*d,

quoted

 					   u32 offset, u32 val)
 {

@@ -76,15 +81,28 @@ static const struct fpga_bridge_ops

xlnx_pr_decoupler_br_ops = {

quoted

 	.enable_show = xlnx_pr_decoupler_enable_show,  };

+static const struct xlnx_config_data decoupler_config = {
+	.name = "Xilinx PR Decoupler",
+};
+
+static const struct xlnx_config_data shutdown_config = {
+	.name = "Xilinx DFX AXI shutdown mgr",

To be consistent with decoupler name,

shutdown mgr -> Shutdown Manager

Will fix in v2.

quoted

+};
+
 static const struct of_device_id xlnx_pr_decoupler_of_match[] = {
-	{ .compatible = "xlnx,pr-decoupler-1.00", },
-	{ .compatible = "xlnx,pr-decoupler", },
+	{ .compatible = "xlnx,pr-decoupler-1.00", .data = &decoupler_config

},

quoted

+	{ .compatible = "xlnx,pr-decoupler", .data = &decoupler_config },
+	{ .compatible = "xlnx,dfx-axi-shutdown-manager-1.00",
+					.data = &shutdown_config },
+	{ .compatible = "xlnx,dfx-axi-shutdown-manager",
+					.data = &shutdown_config },
 	{},
 };
 MODULE_DEVICE_TABLE(of, xlnx_pr_decoupler_of_match);

 static int xlnx_pr_decoupler_probe(struct platform_device *pdev)  {
+	struct device_node *np = pdev->dev.of_node;
 	struct xlnx_pr_decoupler_data *priv;
 	struct fpga_bridge *br;
 	int err;

@@ -94,6 +112,14 @@ static int xlnx_pr_decoupler_probe(struct

platform_device *pdev)

quoted

 	if (!priv)
 		return -ENOMEM;

+	if (np) {
+		const struct of_device_id *match;
+
+		match = of_match_node(xlnx_pr_decoupler_of_match, np);
+		if (match && match->data)
+			priv->ipconfig = match->data;
+	}
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	priv->io_base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(priv->io_base))

@@ -114,7 +140,7 @@ static int xlnx_pr_decoupler_probe(struct

platform_device *pdev)

 	clk_disable(priv->clk);

-	br = devm_fpga_bridge_create(&pdev->dev, "Xilinx PR Decoupler",
+	br = devm_fpga_bridge_create(&pdev->dev, priv->ipconfig->name,
 				     &xlnx_pr_decoupler_br_ops, priv);
 	if (!br) {
 		err = -ENOMEM;

@@ -125,7 +151,8 @@ static int xlnx_pr_decoupler_probe(struct

platform_device *pdev)

 	err = fpga_bridge_register(br);
 	if (err) {
-		dev_err(&pdev->dev, "unable to register Xilinx PR

Decoupler");

quoted

+		dev_err(&pdev->dev, "unable to register %s",
+			priv->ipconfig->name);
 		goto err_clk;
 	}

Look at XILINX_PR_DECOUPLER entry in Kconfig, maybe add something like

help

  Say Y to enable drivers for the  ... Decoupler or DFX AIX Shutdown Manager

Will in v2.

Regards,
Navakishore.