On Sat, 2021-01-16 at 12:36 +0300, Sergei Shtylyov wrote:

Hello!

On 16.01.2021 12:06, Chunfeng Yun wrote:

quoted

This is used to fix dtbs_check warning

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
  arch/arm64/boot/dts/mediatek/mt7622.dtsi | 9 +++++----
  1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 5b9ec032ce8d..4cfa09b0ca3c 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi

@@ -740,8 +740,8 @@
  		status = "disabled";
  	};
  
-	u3phy: usb-phy@1a0c4000 {
-		compatible = "mediatek,mt7622-u3phy",
+	u3phy: t-phy@1a0c4000 {

    What is "t-phy"? Perhaps you should have used just "phy" here...

At first I use "phy", but it causes dt_binding_check fail:
"'#phy-cells' is a required property"

Due to we only need add '#phy-cells' for each subnode (usb-phy, pcie-phy
or sata-phy), but not for parent one, I change the parent node name as
"t-phy" which is a glue layer node, not a real phy.
I also prefer to "phy", but seems dt_binding_check can't distinguish
this case.

Thanks

quoted

+		compatible = "mediatek,mt7622-tphy",
  			     "mediatek,generic-tphy-v1";
  		reg = <0 0x1a0c4000 0 0x700>;
  		#address-cells = <2>;

@@ -875,8 +875,9 @@
  		status = "disabled";
  	};
  
-	sata_phy: sata-phy@1a243000 {
-		compatible = "mediatek,generic-tphy-v1";
+	sata_phy: t-phy@1a243000 {

    Same here...

quoted

+		compatible = "mediatek,mt7622-tphy",
+			     "mediatek,generic-tphy-v1";
  		#address-cells = <2>;
  		#size-cells = <2>;
  		ranges;

MBR, Sergei