Re: [RESEND PATCH v5 2/2] PCI: sprd: Add support for Unisoc SoCs' PCIe controller

On Thu, Jan 14, 2021 at 04:29:28PM +0800, Hongtao Wu wrote:

From: Hongtao Wu <redacted>

This series adds PCIe controller driver for Unisoc SoCs.
This controller is based on DesignWare PCIe IP.

Signed-off-by: Hongtao Wu <redacted>
---
 drivers/pci/controller/dwc/Kconfig     |  12 ++
 drivers/pci/controller/dwc/Makefile    |   1 +
 drivers/pci/controller/dwc/pcie-sprd.c | 293 +++++++++++++++++++++++++++++++++
 3 files changed, 306 insertions(+)
 create mode 100644 drivers/pci/controller/dwc/pcie-sprd.c

<...>

+static struct platform_driver sprd_pcie_driver = {
+	.probe = sprd_pcie_probe,
+	.remove = __exit_p(sprd_pcie_remove),

                   ^^^^^^ why is that?

+	.driver = {
+		.name = "sprd-pcie",
+		.of_match_table = sprd_pcie_of_match,
+	},
+};
+
+module_platform_driver(sprd_pcie_driver);
+
+MODULE_DESCRIPTION("Unisoc PCIe host controller driver");
+MODULE_LICENSE("GPL v2");

I think that it needs to be "GPL" and not "GPL v2".

Thanks

--
2.7.4