On Mon, 02 Nov 2020 17:22:19 -0500, Nicolas Pitre wrote:

From: Nicolas Pitre <redacted>

The MIPI I3C HCI (Host Controller Interface) specification defines
a common software driver interface to support compliant MIPI I3C
host controller hardware implementations from multiple vendors.

All that is needed is an I/O area and an interrupt signal;. The hardware
is self-advertising wrt its implementor and implemented capabilities so
there is currently no details that the driver can't figure out on its own.

Signed-off-by: Nicolas Pitre <redacted>
---
 .../devicetree/bindings/i3c/mipi-i3c-hci.yaml | 45 +++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml: 'additionalProperties' is a required property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml: ignoring, error in schema: 
warning: no schema found in file: ./Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml


See https://patchwork.ozlabs.org/patch/1392544

The base for the patch is generally the last rc1. Any dependencies
should be noted.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.