On Wed, 18 Nov 2020 14:00:16 +0200, cristian.birsan@microchip.com wrote:

The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration. The patch was tested on SAM9x60EK, SAMA5D4-EK and SAMA5D3-EK.

Cristian Birsan (3):
  ARM: dts: sam9x60: add pincontrol for USB Host
  ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host
  ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host

[...]

Applied, thanks!

[1/3] ARM: dts: at91: sam9x60: add pincontrol for USB Host
      commit: 5ba6291086d2ae8006be9e0f19bf2001a85c9dc1
[2/3] ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host
      commit: be4dd2d448816a27c1446f8f37fce375daf64148
[3/3] ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host
      commit: e1062fa7292f1e3744db0a487c4ac0109e09b03d

Best regards,
-- 
Alexandre Belloni [off-list ref]