Re: [v5 1/3] arm64: dts: mt8183: add thermal zone node
flat view
From: Hsin-Yi Wang <hidden>
Date: 2020-11-24 08:21:06
Also in:
linux-arm-kernel, linux-mediatek, linux-pm, lkml
On Tue, Oct 13, 2020 at 6:24 PM Michael Kao [off-list ref] wrote:
quoted hunk
From: "Michael.Kao" <redacted> Add thermal zone node to Mediatek MT8183 dts file. Evaluate the thermal zone every 500ms while not cooling and every 100ms when passive cooling is performed. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Michael Kao <redacted> --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 84 ++++++++++++++++++++++++ 1 file changed, 84 insertions(+)diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 8fed72bb35d7..1cd093cf33f3 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi@@ -430,6 +430,86 @@ status = "disabled"; }; + thermal: thermal@1100b000 { + #thermal-sensor-cells = <1>; + compatible = "mediatek,mt8183-thermal"; + reg = <0 0x1100b000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_THERM>, + <&infracfg CLK_INFRA_AUXADC>; + clock-names = "therm", "auxadc"; + resets = <&infracfg MT8183_INFRACFG_AO_THERM_SW_RST>;
According to binding document[1], interrupts is required. interrupts = <0 76 IRQ_TYPE_LEVEL_LOW>; [1] https://elixir.bootlin.com/linux/v5.10-rc3/source/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt#L18
quoted hunk
+ mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + nvmem-cells = <&thermal_calibration>; + nvmem-cell-names = "calibration-data"; + }; + + thermal-zones { + cpu_thermal: cpu_thermal { + polling-delay-passive = <100>; + polling-delay = <500>; + thermal-sensors = <&thermal 0>; + sustainable-power = <5000>; + }; + + /* The tzts1 ~ tzts6 don't need to polling */ + /* The tzts1 ~ tzts6 don't need to thermal throttle */ + + tzts1: tzts1 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 1>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts2: tzts2 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 2>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts3: tzts3 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 3>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts4: tzts4 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 4>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tzts5: tzts5 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 5>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + + tztsABB: tztsABB { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&thermal 6>; + sustainable-power = <5000>; + trips {}; + cooling-maps {}; + }; + }; + i2c3: i2c@1100f000 { compatible = "mediatek,mt8183-i2c"; reg = <0 0x1100f000 0 0x1000>,@@ -675,6 +755,10 @@ compatible = "mediatek,mt8183-efuse", "mediatek,efuse"; reg = <0 0x11f10000 0 0x1000>; + + thermal_calibration: calib@180 { + reg = <0x180 0xc>; + }; }; u3phy: usb-phy@11f40000 { --2.18.0