Re: [PATCH v6 9/9] arm64: dts: rockchip: add isp and sensors for Scarlet
From: Heiko Stuebner <heiko@sntech.de>
Date: 2020-11-01 10:55:21
Also in:
linux-media, linux-rockchip, lkml
Am Dienstag, 20. Oktober 2020, 21:38:50 CET schrieb Helen Koike:
From: Eddie Cai <redacted>
Enable ISP and camera sensor ov2685 and ov5695 for Scarlet Chromebook
Verified with:
make ARCH=arm64 dtbs_check
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Signed-off-by: Eddie Cai <redacted>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Helen Koike <redacted>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>looks good, and I'd like to apply this one after the drivers/media-patches of this series got applied. Thanks Heiko
quoted hunk ↗ jump to hunk
--- .../boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 74 +++++++++++++++++++ 1 file changed, 74 insertions(+)diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 60cd1c18cd4e0..beee5fbb34437 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi@@ -296,6 +296,52 @@ camera: &i2c7 { /* 24M mclk is shared between world and user cameras */ pinctrl-0 = <&i2c7_xfer &test_clkout1>; + + /* Rear-facing camera */ + wcam: camera@36 { + compatible = "ovti,ov5695"; + reg = <0x36>; + pinctrl-names = "default"; + pinctrl-0 = <&wcam_rst>; + + clocks = <&cru SCLK_TESTCLKOUT1>; + clock-names = "xvclk"; + + avdd-supply = <&pp2800_cam>; + dvdd-supply = <&pp1250_cam>; + dovdd-supply = <&pp1800_s0>; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + + port { + wcam_out: endpoint { + remote-endpoint = <&mipi_in_wcam>; + data-lanes = <1 2>; + }; + }; + }; + + /* Front-facing camera */ + ucam: camera@3c { + compatible = "ovti,ov2685"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&ucam_rst>; + + clocks = <&cru SCLK_TESTCLKOUT1>; + clock-names = "xvclk"; + + avdd-supply = <&pp2800_cam>; + dovdd-supply = <&pp1800_s0>; + dvdd-supply = <&pp1800_s0>; + reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + + port { + ucam_out: endpoint { + remote-endpoint = <&mipi_in_ucam>; + data-lanes = <1>; + }; + }; + }; }; &cdn_dp {@@ -353,10 +399,38 @@ &io_domains { gpio1830-supply = <&pp1800_s0>; /* APIO4_VDD; 4c 4d */ }; +&isp0 { + status = "okay"; + + ports { + port@0 { + mipi_in_wcam: endpoint@0 { + reg = <0>; + remote-endpoint = <&wcam_out>; + data-lanes = <1 2>; + }; + + mipi_in_ucam: endpoint@1 { + reg = <1>; + remote-endpoint = <&ucam_out>; + data-lanes = <1>; + }; + }; + }; +}; + +&isp0_mmu { + status = "okay"; +}; + &max98357a { sdmode-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; }; +&mipi_dphy_rx0 { + status = "okay"; +}; + &mipi_dsi { status = "okay"; clock-master;