[PATCH v2 12/12] arm64: dts: exynos: remove redundant status=okay in Exynos5433 TM2
From: Krzysztof Kozlowski <krzk@kernel.org>
Date: 2020-10-27 17:10:44
Also in:
linux-arm-kernel, linux-samsung-soc, lkml
Subsystem:
arm/samsung s3c, s5p and exynos arm architectures, the rest · Maintainers:
Krzysztof Kozlowski, Peter Griffin, Linus Torvalds
New nodes are enabled by default, so status=okay is not needed for them. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- Not actually tested on the HW, just checked the output DTB. --- arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 1 - 1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 01ab886fd3e9..97a2f0c7c0cf 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi@@ -92,7 +92,6 @@ i2c_max98504: i2c-gpio-0 { i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; - status = "okay"; max98504: amplifier@31 { compatible = "maxim,max98504";
--
2.25.1