Hi,
On Wed, Oct 21, 2020 at 10:05 PM Alexandru Stan [off-list ref] wrote:
The extra 0 only adds one point in the userspace visible range,
so this change is almost a noop with the current driver behavior.
We don't need the 0% point, userspace seems to handle this just fine
because it uses the bl_power property to turn off the display.
Furthermore after adding "backlight: pwm_bl: Fix interpolation" patch,
the backlight interpolation will work a little differently. So we need
to preemptively remove the 0-3 segment since otherwise we would have a
252 long interpolation that would slowly go between 0 and 3, looking
really bad in userspace. So it's almost a noop/cleanup now, but it will
be required in the future.
Signed-off-by: Alexandru Stan <redacted>
---
arch/arm/boot/dts/rk3288-veyron-jaq.dts | 2 +-
arch/arm/boot/dts/rk3288-veyron-minnie.dts | 2 +-
arch/arm/boot/dts/rk3288-veyron-tiger.dts | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
Reviewed-by: Douglas Anderson <dianders@chromium.org>