On Wed, Oct 14, 2020 at 06:51:19AM -0700, Doug Anderson wrote:
Hi,
On Wed, Oct 14, 2020 at 4:33 AM Daniel Thompson
[off-list ref] wrote:
quoted
On Tue, Oct 13, 2020 at 09:28:38AM -0700, Doug Anderson wrote:
quoted
Hi,
On Tue, Oct 13, 2020 at 1:01 AM Alexandru Stan [off-list ref] wrote:
quoted
Now that we have better interpolation for the backlight
("backlight: pwm_bl: Fix interpolation"), we can now add the curve to
the trogdor boards, being careful to crop the low end.
Just to make it clear, the patch this depends on hasn't landed yet.
Presumably it will land in the v5.10 timeframe? That means that
without extra coordination this patch can target v5.11.
You're talking about patch 1 from this set? Despite the title I view
the patch as changing policy (albeit one that does also fix some annoying
quantization errors at the same time) so it's not necessarily a
candidate for merging outside the merge window (I've not checked with
Lee but I think it likely the shutter is already down for features).
Ugh, I'm off by one. :( Right. New features prepared for v5.10
should already have been baking in linuxnext and merge requests have
already started flowing towards Linus. After v5.10-rc1 then it'd just
fixes and this doesn't really qualify. So the timing dictates that
patch #1 will land in v5.11, not v5.10.
quoted
Moreover I'm not clear why there a dependency here that would stop the
changes landing in different trees.
I haven't tried Alexandru's device tree patch without the associated
code changes, but I guess I just assumed that it would make a really
ugly (non)ideal backlight curve and we'd be better off with what we
currently have (AKA no curve specified at all).
Hrm, thinking about it, I guess the worst case is a slightly non-ideal
backlight curve and it would be all good in the final v5.11 which
would have the device tree and code changes, so you're right that both
the code and device tree could target v5.11 without anything too
bad...
Excellent. I'll try to remember this for v3 so I can get my Acked-by
versus Reviewed-by tags correct ;-) .
Daniel.
quoted
Daniel.
quoted
quoted
Signed-off-by: Alexandru Stan <redacted>
---
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index bf875589d364..ccdabc6c4994 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -179,6 +179,15 @@ pp3300_fp_tp: pp3300-fp-tp-regulator {
backlight: backlight {
compatible = "pwm-backlight";
+ /* The panels don't seem to like anything below ~ 5% */
+ brightness-levels = <
+ 196 256 324 400 484 576 676 784 900 1024 1156 1296
+ 1444 1600 1764 1936 2116 2304 2500 2704 2916 3136
+ 3364 3600 3844 4096
+ >;
+ num-interpolated-steps = <64>;
+ default-brightness-level = <951>;
I haven't done lots of digging here, but this matches what Alexandru
and Matthias agreed upon for the downstream tree and seems sane.
Thus:
Reviewed-by: Douglas Anderson <dianders@chromium.org>