Re: [PATCH v3 0/5] arm64: Initial support for Texas Instrument's J7200 Platform

On 21:52-20200908, Lokesh Vutla wrote:

This series adds initial support for latest new SoC, J7200, from Texas Instruments.

The J7200 SoC is a part of the K3 Multicore SoC architecture platform.
It is targeted for for automotive gateway, vehicle compute systems,
Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications.
The SoC aims to meet the complex processing needs of modern embedded products.

See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1

This series is based on the ti-k3-dts-next from Nishanth's tree[0].
Boot log: https://pastebin.ubuntu.com/p/Ppng92TR9z/

Thanks a bunch. Will also appreciate a test against linux-next tag

Changes since v2:
- Update Makefile to build dtbs using CONFIG_ARCH_K3
- use 0x00 in all places just to be consistent for all K3 devices
- Fixed upper case to lower case in reg property.

[0] git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git

Lokesh Vutla (5):
  arm64: dts: ti: Makefile: Use ARCH_K3 for building dtbs
  dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema
  dt-bindings: arm: ti: Add bindings for J7200 SoC
  arm64: dts: ti: Add support for J7200 SoC
  arm64: dts: ti: Add support for J7200 Common Processor Board

Thanks for updating the comments and for your patience.. if you
could address the last batch of comments (sorry for missing them
out in the last review), I think we might be all set..

pending review-by from Rob.

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D