[PATCH 22/30] spi: dw: De-assert chip-select on reset
From: Serge Semin <hidden>
Date: 2020-09-20 11:30:16
Also in:
linux-spi, lkml
Subsystem:
spi subsystem, the rest · Maintainers:
Mark Brown, Linus Torvalds
SPI memory operations implementation will require to have the CS register cleared before executing the operation in order not to have the transmission automatically started prior the Tx FIFO is pre-initialized. Let's clear the register then on explicit controller reset to fulfil the requirements in case of an error or having the CS left set by a bootloader or another software. Signed-off-by: Serge Semin <redacted> --- drivers/spi/spi-dw.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index cfc9f63acde4..eb1d46983319 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h@@ -237,15 +237,16 @@ static inline void spi_umask_intr(struct dw_spi *dws, u32 mask) } /* - * This disables the SPI controller, interrupts, clears the interrupts status, - * and re-enable the controller back. Transmit and receive FIFO buffers are - * cleared when the device is disabled. + * This disables the SPI controller, interrupts, clears the interrupts status + * and CS, then re-enables the controller back. Transmit and receive FIFO + * buffers are cleared when the device is disabled. */ static inline void spi_reset_chip(struct dw_spi *dws) { spi_enable_chip(dws, 0); spi_mask_intr(dws, 0xff); dw_readl(dws, DW_SPI_ICR); + dw_writel(dws, DW_SPI_SER, 0); spi_enable_chip(dws, 1); }
--
2.27.0