Re: [PATCH 1/2] dt-bindings: pinctrl: at91-pio4: add microchip,sama7g5
From: <Nicolas.Ferre@microchip.com>
Date: 2020-09-17 19:56:12
Also in:
linux-arm-kernel, linux-gpio, lkml
On 17/09/2020 at 15:12, Eugen Hristev wrote:
Add compatible string for microchip sama7g5 SoC. Signed-off-by: Eugen Hristev <redacted>
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
quoted hunk ↗ jump to hunk
--- .../devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt index 04d16fb69eb7..265015bc0603 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt@@ -4,7 +4,9 @@ The Atmel PIO4 controller is used to select the function of a pin and to configure it. Required properties: -- compatible: "atmel,sama5d2-pinctrl". +- compatible: + "atmel,sama5d2-pinctrl" + "microchip,sama7g5-pinctrl" - reg: base address and length of the PIO controller. - interrupts: interrupt outputs from the controller, one for each bank. - interrupt-controller: mark the device node as an interrupt controller.
-- Nicolas Ferre