[PATCH 1/3] dt-bindings: PCI: uniphier: Add iATU register description
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Date: 2020-09-11 08:50:18
Also in:
linux-arm-kernel, linux-pci, lkml
Subsystem:
open firmware and flattened device tree bindings, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
In the dt-bindings, "atu" reg-names is required to get the register space for iATU in Synopsys DWC version 4.80 or later. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/pci/uniphier-pcie.txt | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
index 1fa2c59..c4b7381 100644
--- a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt@@ -16,6 +16,7 @@ Required properties: "dbi" - controller configuration registers "link" - SoC-specific glue layer registers "config" - PCIe configuration space + "atu" - iATU registers for DWC version 4.80 or later - clocks: A phandle to the clock gate for PCIe glue layer including the host controller. - resets: A phandle to the reset line for PCIe glue layer including
--
2.7.4