[PATCH net-next + leds v2 4/7] dt-bindings: net: ethernet-phy: add description for PHY LEDs
From: Marek Behún <hidden>
Date: 2020-09-09 16:37:44
Also in:
linux-leds, lkml, netdev
Subsystem:
ethernet phy library, networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Document binding for LEDs connected to an ethernet PHY chip. Signed-off-by: Marek Behún <redacted> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org --- Documentation/devicetree/bindings/net/ethernet-phy.yaml | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index a9e547ac79051..f593e8709dd0d 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml@@ -174,6 +174,14 @@ properties: PHY's that have configurable TX internal delays. If this property is present then the PHY applies the TX delay. + leds: + type: object + description: | + This is used to described LEDs that are connected to the PHY chip and + their blinking can be controlled by the PHY. + allOf: + - $ref: /schemas/leds/linux,hw-controlled-leds.yaml# + required: - reg
--
2.26.2