[PATCH v2 12/23] iommu/mediatek: Move hw_init into attach_device
From: Yong Wu <yong.wu@mediatek.com>
Date: 2020-09-05 08:13:11
Also in:
linux-arm-kernel, linux-iommu, linux-mediatek, lkml
Subsystem:
iommu subsystem, mediatek iommu driver, the rest · Maintainers:
Joerg Roedel, Will Deacon, Yong Wu, Linus Torvalds
In attach device, it will update the pagetable base address register. Move the hw_init function also here. Then it only need call pm_runtime_get/put one time here if m4u has power domain. Signed-off-by: Yong Wu <yong.wu@mediatek.com> --- drivers/iommu/mtk_iommu.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 6e85c9976a33..940b7a9191b2 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c@@ -122,6 +122,8 @@ struct mtk_iommu_domain { static const struct iommu_ops mtk_iommu_ops; +static int mtk_iommu_hw_init(const struct mtk_iommu_data *data); + /* * In M4U 4GB mode, the physical address is remapped as below: *
@@ -377,12 +379,16 @@ static int mtk_iommu_attach_device(struct iommu_domain *domain, { struct mtk_iommu_data *data = dev_iommu_priv_get(dev); struct mtk_iommu_domain *dom = to_mtk_domain(domain); + int ret; if (!data) return -ENODEV; /* Update the pgtable base address register of the M4U HW */ if (!data->m4u_dom) { + ret = mtk_iommu_hw_init(data); + if (ret) + return ret; data->m4u_dom = dom; writel(dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK, data->base + REG_MMU_PT_BASE_ADDR);
@@ -705,10 +711,6 @@ static int mtk_iommu_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); - ret = mtk_iommu_hw_init(data); - if (ret) - return ret; - ret = iommu_device_sysfs_add(&data->iommu, dev, NULL, "mtk-iommu.%pa", &ioaddr); if (ret)
--
2.18.0