Hi Mateusz,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on robh/for-next]
[also build test WARNING on tty/tty-testing usb/usb-testing staging/staging-testing driver-core/driver-core-testing linus/master v5.8 next-20200731]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Mateusz-Holenko/LiteX-SoC-controller-and-LiteUART-serial-driver/20200722-183024
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: i386-randconfig-s032-20200803 (attached as .config)
compiler: gcc-9 (Debian 9.3.0-14) 9.3.0
reproduce:
        # apt-get install sparse
        # sparse version: v0.6.2-117-g8c7aee71-dirty
        # save the attached .config to linux build tree
        make W=1 C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' ARCH=i386 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <redacted>


sparse warnings: (new ones prefixed by >>)

quoted

drivers/soc/litex/litex_soc_ctrl.c:61:24: sparse: sparse: incorrect type in argument 1 (different base types) @@     expected unsigned int val @@     got restricted __le32 [usertype] @@
drivers/soc/litex/litex_soc_ctrl.c:61:24: sparse:     expected unsigned int val

   drivers/soc/litex/litex_soc_ctrl.c:61:24: sparse:     got restricted __le32 [usertype]
   drivers/soc/litex/litex_soc_ctrl.c:77:32: sparse: sparse: cast to restricted __le32

vim +61 drivers/soc/litex/litex_soc_ctrl.c

    32	
    33	/*
    34	 * LiteX SoC Generator, depending on the configuration,
    35	 * can split a single logical CSR (Control & Status Register)
    36	 * into a series of consecutive physical registers.
    37	 *
    38	 * For example, in the configuration with 8-bit CSR Bus,
    39	 * 32-bit aligned (the default one for 32-bit CPUs) a 32-bit
    40	 * logical CSR will be generated as four 32-bit physical registers,
    41	 * each one containing one byte of meaningful data.
    42	 *
    43	 * For details see: https://github.com/enjoy-digital/litex/wiki/CSR-Bus
    44	 *
    45	 * The purpose of `litex_set_reg`/`litex_get_reg` is to implement
    46	 * the logic of writing to/reading from the LiteX CSR in a single
    47	 * place that can be then reused by all LiteX drivers.
    48	 */
    49	void litex_set_reg(void __iomem *reg, unsigned long reg_size,
    50			    unsigned long val)
    51	{
    52		unsigned long shifted_data, shift, i;
    53		unsigned long flags;
    54	
    55		spin_lock_irqsave(&csr_lock, flags);
    56	
    57		for (i = 0; i < reg_size; ++i) {
    58			shift = ((reg_size - i - 1) * LITEX_SUBREG_SIZE_BIT);
    59			shifted_data = val >> shift;
    60	
  > 61			writel(cpu_to_le32(shifted_data), reg + (LITEX_REG_SIZE * i));
    62		}
    63	
    64		spin_unlock_irqrestore(&csr_lock, flags);
    65	}
    66	EXPORT_SYMBOL_GPL(litex_set_reg);
    67	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org