[PATCH v4 3/4] dt-bindings: media: imx274: Move clock and supplies to required properties
From: Sowjanya Komatineni <skomatineni@nvidia.com>
Date: 2020-08-31 19:52:57
Also in:
linux-media, lkml
Subsystem:
media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, the rest · Maintainers:
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Clock and supplies are external to IMX274 sensor and are dependent on camera module design. So, this patch moves them to required properties. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> --- Documentation/devicetree/bindings/media/i2c/imx274.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt
index d0a5c899..b43bed6 100644
--- a/Documentation/devicetree/bindings/media/i2c/imx274.txt
+++ b/Documentation/devicetree/bindings/media/i2c/imx274.txt@@ -10,15 +10,15 @@ at 1440 Mbps. Required Properties: - compatible: value should be "sony,imx274" for imx274 sensor - reg: I2C bus address of the device - -Optional Properties: -- reset-gpios: Sensor reset GPIO - clocks: Reference to the input clock. - clock-names: Should be "inck". - vana-supply: Sensor 2.8v analog supply. - vdig-supply: Sensor 1.8v digital core supply. - vddl-supply: Sensor digital IO 1.2v supply. +Optional Properties: +- reset-gpios: Sensor reset GPIO + The imx274 device node should contain one 'port' child node with an 'endpoint' subnode. For further reading on port node refer to Documentation/devicetree/bindings/media/video-interfaces.txt.
--
2.7.4