Re: [PATCH v1 1/2] ARM: dts: rockchip: rename and label gpio-led subnodes part 3
From: Heiko Stuebner <heiko@sntech.de>
Date: 2020-08-30 20:43:57
Also in:
linux-arm-kernel, linux-rockchip, lkml
Hi Johan, Am Donnerstag, 13. August 2020, 21:34:54 CEST schrieb Johan Jonker:
Current dts files with 'gpio-led' nodes were manually verified. In order to automate this process leds-gpio.txt has been converted to yaml. With this conversion a check for pattern properties was added. In part 3 rename and label gpio-led subnodes with pinctrl. To make things equal to other dts files move pinctrl below the compatible property. Fix with help of the following rules: 1: Add nodename in the preferred form. 2: Always add a label that ends with '_led' to prevent conflicts with other labels such as 'power' and 'mmc' 3: If leds need pinctrl add a label that ends with '_led_pin' also to prevent conflicts with other labels.
I'm undecided about this ... and while thinking about this, realized that we already have some changes doing that in the tree. To explain, in general the pinctrl names should come from the names used in the actual device schematics, as this makes it easier to find and compare them between devicetree and schematics files. So creating an arbitrary foo_led_pin pinctrl instead breaks this searchability which I'd really like to keep. Heiko
quoted hunk ↗ jump to hunk
patternProperties: # The first form is preferred, but fall back to just 'led' # anywhere in the node name to at least catch some child nodes. "(^led-[0-9a-f]$|led)": make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/ leds-gpio.yaml Signed-off-by: Johan Jonker <redacted> --- arch/arm/boot/dts/rk3036-kylin.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 7154b827e..bf808cda6 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts@@ -15,12 +15,12 @@ leds: gpio-leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_pin>; work_led: led-0 { gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; label = "kylin:red:led"; - pinctrl-names = "default"; - pinctrl-0 = <&led_ctl>; }; };@@ -367,7 +367,7 @@ &pinctrl { leds { - led_ctl: led-ctl { + work_led_pin: work-led-pin { rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; }; };