[PATCH 4.19 3/7] dt-bindings: mmc: tegra: Add tmclk for Tegra210 and Tegra186
From: Sowjanya Komatineni <skomatineni@nvidia.com>
Date: 2020-08-28 22:26:10
Also in:
linux-mmc, linux-tegra, lkml, stable
Subsystem:
multimedia card (mmc), secure digital (sd) and sdio subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Tegra210 and later uses separate SDMMC_LEGACY_TM clock for data
timeout.
So, this patch adds "tmclk" to Tegra sdhci clock property in the
device tree binding.
Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Cc: stable <redacted> # 4.19
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
.../bindings/mmc/nvidia,tegra20-sdhci.txt | 23 ++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
index 9bce578..a5f1fae 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt@@ -14,8 +14,15 @@ Required properties: - "nvidia,tegra124-sdhci": for Tegra124 and Tegra132 - "nvidia,tegra210-sdhci": for Tegra210 - "nvidia,tegra186-sdhci": for Tegra186 -- clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. +- clocks: For Tegra210 and Tegra186 must contain two entries. + One for the module clock and one for the timeout clock. + For all other Tegra devices, must contain a single entry for + the module clock. See ../clocks/clock-bindings.txt for details. +- clock-names: For Tegra210 and Tegra186 must contain the strings 'sdhci' + and 'tmclk' to represent the module and the timeout clocks, + respectively. + For all other Tegra devices must contain the string 'sdhci' + to represent the module clock. - resets : Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. - reset-names : Must include the following entries:
@@ -38,3 +45,15 @@ sdhci@c8000200 { power-gpios = <&gpio 155 0>; /* gpio PT3 */ bus-width = <8>; }; + +sdhci@700b0000 { + compatible = "nvidia,tegra210-sdhci"; + reg = <0x0 0x700b0000 0x0 0x200>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SDMMC1>, + <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>; + clock-names = "sdhci", "tmclk"; + resets = <&tegra_car 14>; + reset-names = "sdhci"; + status = "disabled"; +};
--
2.7.4