On Fri, 28 Aug 2020 14:52:18 -0500, Ricardo Rivera-Matos wrote:

Add the bindings for the bq256xx series of battery charging ICs.

Datasheets:
- https://www.ti.com/lit/ds/symlink/bq25600.pdf
- https://www.ti.com/lit/ds/symlink/bq25601.pdf
- https://www.ti.com/lit/ds/symlink/bq25600d.pdf
- https://www.ti.com/lit/ds/symlink/bq25601d.pdf
- https://www.ti.com/lit/ds/symlink/bq25611d.pdf
- https://www.ti.com/lit/ds/symlink/bq25618.pdf
- https://www.ti.com/lit/ds/symlink/bq25619.pdf

Signed-off-by: Ricardo Rivera-Matos <redacted>
---
 .../bindings/power/supply/bq256xx.yaml        | 97 +++++++++++++++++++
 1 file changed, 97 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/supply/bq256xx.yaml

My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/supply/bq256xx.example.dt.yaml: battery: 'termination-current-microamp' does not match any of the regexes: '^ocv-capacity-table-[0-9]+$', 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/supply/battery.yaml


See https://patchwork.ozlabs.org/patch/1353535

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.