On 26-08-20, 08:35, Rob Herring wrote:

On Wed, Aug 26, 2020 at 12:32 AM Vinod Koul [off-list ref] wrote:

quoted

On 25-08-20, 20:21, Vinod Koul wrote:

quoted

Hey Rob,

On 24-08-20, 11:40, Rob Herring wrote:

quoted

On Mon, 24 Aug 2020 14:17:10 +0530, Vinod Koul wrote:

quoted

Add devicetree binding documentation for GPI DMA controller
implemented on Qualcomm SoCs

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 .../devicetree/bindings/dma/qcom-gpi.yaml     | 87 +++++++++++++++++++
 1 file changed, 87 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/qcom-gpi.yaml

My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/dma/qcom-gpi.yaml: properties:qcom,ev-factor: {'description': 'Event ring transfer size compare to channel transfer ring. Event ring length = ev-factor * transfer ring size', 'maxItems': 1} is not valid under any of the given schemas (Possible causes of the failure):
    /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/dma/qcom-gpi.yaml: properties:qcom,ev-factor: 'not' is a required property

Okay updating dt-schema I do see this, now the question is what is this
and what does it mean ;-) I am not sure I comprehend the error message.
I see this for all the new properties I added as required for this
device node

Okay I think I have figured it out, I need to provide ref to
/schemas/types.yaml#definitions/uint32 for this to work, which does
makes sense to me.

  qcom,max-num-gpii:
    $ref: /schemas/types.yaml#definitions/uint32
    maxItems: 1

uint32 is always 1 item, so drop. Is there a max value you can define?

Sorry not sure I follow, to clarify you mean drop uint32, if so which
type to use u8? I can use u8 as max wont be beyond 255.

Yes I will define min as well max values too.

Otherwise, up to 2^32 - 1 is valid.

I see one more warning given by your bot which I am able to reproduce as
well:
Documentation/devicetree/bindings/dma/qcom,gpi.example.dt.yaml: example-0: dma-controller@800000:reg:0: [0, 8388608, 0, 393216] is too long

So to fix this I added the #address-cells and #size-cells

        #address-cells = <2>;
        #size-cells = <2>;
        reg = <0x0 0x00800000 0x0 0x60000>;

But I am getting the warning, what am I doing incorrect

-- 
~Vinod