[PATCH v2 02/13] dt-bindings: extcon: ptn5150: Use generic "interrupts" property
From: Krzysztof Kozlowski <krzk@kernel.org>
Date: 2020-08-17 07:02:33
Also in:
lkml
Subsystem:
external connector subsystem (extcon), nxp ptn5150a cc logic and extcon driver, open firmware and flattened device tree bindings, the rest · Maintainers:
MyungJoo Ham, Chanwoo Choi, Krzysztof Kozlowski, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Interrupts do not have to be always GPIO based so instead of expecting "int-gpios" property and converting the GPIO to an interrupt, just accept any interrupt via generic "interrupts" property. Mark the old "int-gpios" as deprecated. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- .../devicetree/bindings/extcon/extcon-ptn5150.yaml | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
index f6316f12028b..1ddc97db3e61 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml@@ -19,8 +19,13 @@ properties: const: nxp,ptn5150 int-gpios: + deprecated: true description: GPIO pin (input) connected to the PTN5150's INTB pin. + Use "interrupts" instead. + + interrupts: + maxItems: 1 reg: maxItems: 1
@@ -31,7 +36,7 @@ properties: required: - compatible - - int-gpios + - interrupts - reg - vbus-gpios
@@ -40,6 +45,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; #size-cells = <0>;
@@ -47,7 +53,8 @@ examples: ptn5150@1d { compatible = "nxp,ptn5150"; reg = <0x1d>; - int-gpios = <&msmgpio 78 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&msmgpio>; + interrupts = <78 IRQ_TYPE_LEVEL_HIGH>; vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>; }; };
--
2.17.1