[PATCH AUTOSEL 5.7 13/58] arm64: dts: qcom: msm8916: Replace invalid bias-pull-none property
From: Sasha Levin <sashal@kernel.org>
Date: 2020-08-08 23:37:47
Also in:
linux-arm-msm, lkml, stable
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
From: Stephan Gerhold <stephan@gerhold.net>
[ Upstream commit 1b6a1a162defe649c5599d661b58ac64bb6f31b6 ]
msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.
However, "bias-pull-none" actually does not exist at all - not in
mainline and not in downstream. I can only guess that the original
intention was to configure "no pull", i.e. bias-disable.
Change it to that instead.
Fixes: 143bb9ad85b7 ("arm64: dts: qcom: add audio pinctrls")
Cc: Srinivas Kandagatla <redacted>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-2-stephan@gerhold.net (local)
Signed-off-by: Bjorn Andersson <redacted>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index 242aaea688040..1235830ffd0b7 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi@@ -508,7 +508,7 @@ pinconf { pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; drive-strength = <8>; - bias-pull-none; + bias-disable; }; }; cdc_pdm_lines_sus: pdm_lines_off {
@@ -537,7 +537,7 @@ pinconf { pins = "gpio113", "gpio114", "gpio115", "gpio116"; drive-strength = <8>; - bias-pull-none; + bias-disable; }; };
@@ -565,7 +565,7 @@ pinmux { pinconf { pins = "gpio110"; drive-strength = <8>; - bias-pull-none; + bias-disable; }; };
@@ -591,7 +591,7 @@ pinmux { pinconf { pins = "gpio116"; drive-strength = <8>; - bias-pull-none; + bias-disable; }; }; ext_mclk_tlmm_lines_sus: mclk_lines_off {
@@ -619,7 +619,7 @@ pinconf { pins = "gpio112", "gpio117", "gpio118", "gpio119"; drive-strength = <8>; - bias-pull-none; + bias-disable; }; }; ext_sec_tlmm_lines_sus: tlmm_lines_off {
--
2.25.1