Thread (7 messages) 7 messages, 3 authors, 2020-08-17
STALE2127d
Revisions (4)
  1. v1 current
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v4 [diff vs current]

[PATCH 2/3] regulator: bindings: Add document for MT6315 regulator

From: Hsin-Hsiung Wang <hidden>
Date: 2020-08-03 08:57:47
Also in: linux-arm-kernel, linux-arm-msm, linux-mediatek, lkml
Subsystem: open firmware and flattened device tree bindings, the rest, voltage and current regulator framework · Maintainers: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Liam Girdwood, Mark Brown

Add device tree binding information for mt6315 regulator driver.
Example bindings for mt6315 are added.

Signed-off-by: Hsin-Hsiung Wang <redacted>
---
 .../bindings/regulator/mt6315-regulator.txt        | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/mt6315-regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6315-regulator.txt
new file mode 100644
index 0000000..1c14537
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.txt
@@ -0,0 +1,45 @@
+Mediatek MT6315 Regulator
+
+Required properties:
+- compatible: Must be one of the following.
+	"mediatek,mt6315_3-regulator"
+	"mediatek,mt6315_6-regulator"
+	"mediatek,mt6315_7-regulator"
+- reg: SPMI slave id.
+- regulators: List of regulators provided by this controller.
+  The definition for each of these nodes is defined using the standard binding
+  for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are:
+BUCK:
+  vbuck1, vbuck3, vbuck4
+
+Example:
+	mt6315_3: mt6315@3 {
+		compatible = "mediatek,mt6315_3-regulator";
+		reg = <0x3 0 0xb 1>;
+
+		mt6315_3_vbuck1: vbuck1 {
+			regulator-compatible = "vbuck1";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1193750>;
+			regulator-enable-ramp-delay = <256>;
+			regulator-allowed-modes = <0 1 2 4>;
+		};
+
+		mt6315_3_vbuck3: vbuck3 {
+			regulator-compatible = "vbuck3";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1193750>;
+			regulator-enable-ramp-delay = <256>;
+			regulator-allowed-modes = <0 1 2 4>;
+		};
+
+		mt6315_3_vbuck3: vbuck3 {
+			regulator-compatible = "vbuck3";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1193750>;
+			regulator-enable-ramp-delay = <256>;
+			regulator-allowed-modes = <0 1 2 4>;
+		};
+	};
-- 
2.6.4
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help