[PATCH 1/7] dt-bindings: usb: bdc: Update compatible strings
From: Al Cooper <alcooperx@gmail.com>
Date: 2020-07-17 15:23:47
Also in:
linux-usb, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, usb subsystem · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman
Remove "brcm,bdc-v0.16" because it was never used on any system. Add "brcm,bdc-udc-v3.1" which exists for any STB system with BDC. Signed-off-by: Al Cooper <alcooperx@gmail.com> --- Documentation/devicetree/bindings/usb/brcm,bdc.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.txt b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
index 63e63af3bf59..597f3902d857 100644
--- a/Documentation/devicetree/bindings/usb/brcm,bdc.txt
+++ b/Documentation/devicetree/bindings/usb/brcm,bdc.txt@@ -4,7 +4,7 @@ Broadcom USB Device Controller (BDC) Required properties: - compatible: must be one of: - "brcm,bdc-v0.16" + "brcm,bdc-udc-v3.1" "brcm,bdc" - reg: the base register address and length - interrupts: the interrupt line for this controller
@@ -21,7 +21,7 @@ On Broadcom STB platforms, these properties are required: Example: bdc@f0b02000 { - compatible = "brcm,bdc-v0.16"; + compatible = "brcm,bdc-udc-v3.1"; reg = <0xf0b02000 0xfc4>; interrupts = <0x0 0x60 0x0>; phys = <&usbphy_0 0x0>;
--
2.17.1