Re: [PATCH v3 00/16] Allwinner A100 Initial support

[PATCH v3 00/16] Allwinner A100 Initial support · Frank Lee <hidden> · 2020-07-08
[PATCH v3 01/16] dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU · Frank Lee <hidden> · 2020-07-08
Re: [PATCH v3 01/16] dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU · Rob Herring <robh@kernel.org> · 2020-07-13
Re: [PATCH v3 01/16] dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU · Rob Herring <robh+dt@kernel.org> · 2020-07-13
[PATCH v3 03/16] dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings · Frank Lee <hidden> · 2020-07-08
Re: [PATCH v3 03/16] dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings · Rob Herring <robh@kernel.org> · 2020-07-13
[PATCH v3 04/16] dt-bindings: pinctrl: sunxi: make gpio banks supplies required · Frank Lee <hidden> · 2020-07-08
Re: [PATCH v3 04/16] dt-bindings: pinctrl: sunxi: make gpio banks supplies required · Rob Herring <robh@kernel.org> · 2020-07-09
Re: [PATCH v3 04/16] dt-bindings: pinctrl: sunxi: make gpio banks supplies required · Rob Herring <robh@kernel.org> · 2020-07-09
Re: [PATCH v3 04/16] dt-bindings: pinctrl: sunxi: make gpio banks supplies required · Ondřej Jirman <hidden> · 2020-07-09
Re: [PATCH v3 04/16] dt-bindings: pinctrl: sunxi: make gpio banks supplies required · Maxime Ripard <hidden> · 2020-07-10
Re: [PATCH v3 04/16] dt-bindings: pinctrl: sunxi: make gpio banks supplies required · Frank Lee <hidden> · 2020-07-13
[PATCH v3 06/16] dt-bindings: nvmem: SID: add binding for A100's SID controller · Frank Lee <hidden> · 2020-07-08
Re: [PATCH v3 06/16] dt-bindings: nvmem: SID: add binding for A100's SID controller · Rob Herring <robh@kernel.org> · 2020-07-09
[PATCH v3 07/16] dt-bindings: thermal: sun8i: Add binding for A100's THS controller · Frank Lee <hidden> · 2020-07-08
Re: [PATCH v3 07/16] dt-bindings: thermal: sun8i: Add binding for A100's THS controller · Rob Herring <robh@kernel.org> · 2020-07-13
[PATCH v3 08/16] thermal: sun8i: add TEMP_CALIB_MASK for calibration data in sun50i_h6_ths_calibrate · Frank Lee <hidden> · 2020-07-08
[PATCH v3 09/16] thermal: sun8i: Add A100's THS controller support · Frank Lee <hidden> · 2020-07-08
[PATCH v3 02/16] clk: sunxi-ng: add support for the Allwinner A100 CCU · Frank Lee <hidden> · 2020-07-08
[PATCH v3 10/16] mfd: axp20x: Allow the AXP803 to be probed by I2C · Frank Lee <hidden> · 2020-07-08
Re: [PATCH v3 10/16] mfd: axp20x: Allow the AXP803 to be probed by I2C · Lee Jones <hidden> · 2020-07-16
[PATCH v3 05/16] pinctrl: sunxi: add support for the Allwinner A100 pin controller · Frank Lee <hidden> · 2020-07-08
Re: [PATCH v3 00/16] Allwinner A100 Initial support · Corentin Labbe <clabbe.montjoie@gmail.com> · 2020-07-08
Re: [PATCH v3 00/16] Allwinner A100 Initial support · Frank Lee <hidden> · 2020-07-13
Re: [PATCH v3 00/16] Allwinner A100 Initial support · Maxime Ripard <hidden> · 2020-07-10
Re: [PATCH v3 00/16] Allwinner A100 Initial support · Frank Lee <hidden> · 2020-07-13

From: Corentin Labbe <clabbe.montjoie@gmail.com>
Date: 2020-07-08 07:45:54
Also in: linux-arm-kernel, linux-clk, linux-gpio, linux-i2c, linux-pm, lkml

On Wed, Jul 08, 2020 at 03:19:26PM +0800, Frank Lee wrote:

This patch set adds initial support for allwinner a100 soc,
which is a 64-bit tablet chip.

Hello

Does a product already exists with it ? I couldnt found any.
Does a datasheet is availlable ?

Regards

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help