[PATCH v6 1/3] dt-bindings: Add ch7322 media i2c device
From: Jeff Chase <hidden>
Date: 2020-06-23 00:00:26
Also in:
linux-media
Subsystem:
chrontel ch7322 cec driver, media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, the rest · Maintainers:
Joe Tessler, Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The ch7322 is a Chrontel CEC controller. Signed-off-by: Jeff Chase <redacted> Reviewed-by: Rob Herring <robh@kernel.org> --- .../bindings/media/i2c/chrontel,ch7322.yaml | 67 +++++++++++++++++++ MAINTAINERS | 7 ++ 2 files changed, 74 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
new file mode 100644
index 000000000000..daa2869377c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml@@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/i2c/chrontel,ch7322.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Chrontel HDMI-CEC Controller + +maintainers: + - Jeff Chase <jnchase@google.com> + +description: + The Chrontel CH7322 is a discrete HDMI-CEC controller. It is + programmable through I2C and drives a single CEC line. + +properties: + compatible: + const: chrontel,ch7322 + + reg: + description: I2C device address + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + description: + Reference to the GPIO connected to the RESET pin, if any. This + pin is active-low. + maxItems: 1 + + standby-gpios: + description: + Reference to the GPIO connected to the OE pin, if any. When low + the device will respond to power status requests with "standby" + if in auto mode. + maxItems: 1 + + # see ../cec.txt + hdmi-phandle: + description: phandle to the HDMI controller + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + ch7322@75 { + compatible = "chrontel,ch7322"; + reg = <0x75>; + interrupts = <47 IRQ_TYPE_EDGE_RISING>; + standby-gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + hdmi-phandle = <&hdmi>; + }; + };
diff --git a/MAINTAINERS b/MAINTAINERS
index 68f21d46614c..c1c17ca17830 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS@@ -4101,6 +4101,13 @@ F: drivers/power/supply/cros_usbpd-charger.c N: cros_ec N: cros-ec +CHRONTEL CH7322 CEC DRIVER +M: Jeff Chase <jnchase@google.com> +L: linux-media@vger.kernel.org +S: Maintained +T: git git://linuxtv.org/media_tree.git +F: Documentation/devicetree/bindings/media/i2c/chontel,ch7322.yaml + CIRRUS LOGIC AUDIO CODEC DRIVERS M: James Schulman <james.schulman@cirrus.com> M: David Rhodes <david.rhodes@cirrus.com>
--
2.27.0.111.gc72c7da667-goog