[PATCH 2/3] rtc: abx80x: Add utility function for writing configuration key
From: Kevin P. Fleming <hidden>
Date: 2020-06-12 22:36:47
Also in:
linux-rtc
Subsystem:
real time clock (rtc) subsystem, the rest · Maintainers:
Alexandre Belloni, Linus Torvalds
Writing one of key two values into the configuration key register is a common operation, so a utility function has been added to provide consistent behavior and eliminate code duplication. Signed-off-by: Kevin P. Fleming <redacted> Cc: Alessandro Zummo <redacted> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> To: linux-rtc@vger.kernel.org --- drivers/rtc/rtc-abx80x.c | 39 ++++++++++++++++----------------------- 1 file changed, 16 insertions(+), 23 deletions(-)
diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index 803725b3a02c3..daa6f27040e61 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c@@ -117,6 +117,16 @@ struct abx80x_priv { struct watchdog_device wdog; }; +static int abx80x_write_config_key(struct i2c_client *client, u8 key) +{ + if (i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY, key) < 0) { + dev_err(&client->dev, "Unable to write configuration key\n"); + return -EIO; + } + + return 0; +} + static int abx80x_is_rc_mode(struct i2c_client *client) { int flags = 0;
@@ -140,12 +150,8 @@ static int abx80x_enable_trickle_charger(struct i2c_client *client, * Write the configuration key register to enable access to the Trickle * register */ - err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY, - ABX8XX_CFG_KEY_MISC); - if (err < 0) { - dev_err(&client->dev, "Unable to write configuration key\n"); + if (abx80x_write_config_key(client, ABX8XX_CFG_KEY_MISC) < 0) return -EIO; - } err = i2c_smbus_write_byte_data(client, ABX8XX_REG_TRICKLE, ABX8XX_TRICKLE_CHARGE_ENABLE |
@@ -358,12 +364,8 @@ static int abx80x_rtc_set_autocalibration(struct device *dev, } /* Unlock write access to Oscillator Control Register */ - retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY, - ABX8XX_CFG_KEY_OSC); - if (retval < 0) { - dev_err(dev, "Failed to write CONFIG_KEY register\n"); - return retval; - } + if (abx80x_write_config_key(client, ABX8XX_CFG_KEY_OSC) < 0) + return -EIO; retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags);
@@ -450,12 +452,8 @@ static ssize_t oscillator_store(struct device *dev, flags |= (ABX8XX_OSC_OSEL); /* Unlock write access on Oscillator Control register */ - retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY, - ABX8XX_CFG_KEY_OSC); - if (retval < 0) { - dev_err(dev, "Failed to write CONFIG_KEY register\n"); - return retval; - } + if (abx80x_write_config_key(client, ABX8XX_CFG_KEY_OSC) < 0) + return -EIO; retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags); if (retval < 0) {
@@ -762,13 +760,8 @@ static int abx80x_probe(struct i2c_client *client, * Write the configuration key register to enable access to * the config2 register */ - err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY, - ABX8XX_CFG_KEY_MISC); - if (err < 0) { - dev_err(&client->dev, - "Unable to write configuration key\n"); + if (abx80x_write_config_key(client, ABX8XX_CFG_KEY_MISC) < 0) return -EIO; - } err = i2c_smbus_write_byte_data(client, ABX8XX_REG_OUT_CTRL, data | ABX8XX_OUT_CTRL_EXDS);
--
2.26.2