[PATCH v2 04/13] arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
From: Konrad Dybcio <hidden>
Date: 2020-06-25 18:13:30
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
This pinout is common for every 8992-based device and should therefore reside in the SoC device tree. Also convert addresses into phandles. Signed-off-by: Konrad Dybcio <redacted> --- .../boot/dts/qcom/msm8992-bullhead-rev-101.dts | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
index 4f70681e730d..5969b5cfdc85 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts@@ -23,15 +23,6 @@ chosen { stdout-path = "serial0:115200n8"; }; - soc { - serial@f991e000 { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; - }; - }; - reserved-memory { #address-cells = <2>; #size-cells = <2>;
@@ -48,6 +39,10 @@ ramoops@1ff00000 { }; }; +&blsp1_uart2 { + status = "okay"; +}; + &rpm_requests { pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators";
--
2.27.0