On Thu, 04 Jun 2020 23:10:29 +0200, Michael Walle wrote:

Add a device tree bindings for the board management controller found on
the Kontron SMARC-sAL28 board.

Signed-off-by: Michael Walle <redacted>
---
 .../bindings/gpio/kontron,sl28cpld-gpio.yaml  |  54 +++++++
 .../hwmon/kontron,sl28cpld-hwmon.yaml         |  27 ++++
 .../kontron,sl28cpld-intc.yaml                |  54 +++++++
 .../bindings/mfd/kontron,sl28cpld.yaml        | 153 ++++++++++++++++++
 .../bindings/pwm/kontron,sl28cpld-pwm.yaml    |  35 ++++
 .../watchdog/kontron,sl28cpld-wdt.yaml        |  35 ++++
 6 files changed, 358 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
 create mode 100644 Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
 create mode 100644 Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
 create mode 100644 Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml

My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.example.dt.yaml: sl28cpld@4a: 'gpio@1a', 'gpio@1b', 'hwmon@b', 'interrupt-controller@1c', 'pwm@c', 'pwm@e' do not match any of the regexes: '^gpio(@[0-9]+)?$', '^hwmon(@[0-9]+)?$', '^interrupt-controller(@[0-9]+)?$', '^pwm(@[0-9]+)?$', '^watchdog(@[0-9]+)?$', 'pinctrl-[0-9]+'

See https://patchwork.ozlabs.org/patch/1303780

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.