Re: [PATCH v2] check: Add 10bit/slave i2c reg flags support
From: Rob Herring <robh+dt@kernel.org>
Date: 2020-06-01 17:08:53
Also in:
linux-i2c, lkml
From: Rob Herring <robh+dt@kernel.org>
Date: 2020-06-01 17:08:53
Also in:
linux-i2c, lkml
On Sat, May 30, 2020 at 3:32 AM Wolfram Sang [off-list ref] wrote:
quoted
+ addr = reg & 0x3FFFFFFFU; + snprintf(unit_addr, sizeof(unit_addr), "%x", addr);Hmm, this hardcoded value will not work if we ever need to add another bit. I hope this will never happen, though.
I had this concern and requested the first time this was submitted (and abandoned) to just mask out the top byte. However, Joel's version of this fix[1] does some actual checks on 10-bit addressing, so I've dropped that request.
quoted
+ if ((reg & (1U << 31)) && addr > 0x3ff)Same here with bit 31. I haven't checked DTC but can't we import the header with the defines into the project? Or is this then a circular dependency?
Easier to just duplicate the define here which Joel's patches do. Rob [1] https://www.spinics.net/lists/devicetree-compiler/msg03196.html