This patch series adds support for PMU, PSCI, SPMI
and SCM, as well as all six cores on msm8992.

Please note though, that due to the lack of a core 
cluster interconnect driver, it is only recommended 
to use one cluster (as in set NR_CPUS to 4) for now.
The other two technically work, but in practice slow
down the platform by a LOT.

Hopefully with a proper MMCC driver this platform can be
brought up to speed with other Qualcomm SoCs.

Konrad Dybcio (14):
  arm64: dts: Add a proper CPU map for MSM8992
  arm64: dts: msm8992: Place clock nodes in clocks{}
  arm64: dts: msm8992: Add a SCM node
  firmware: qcom_scm: Add msm8992 compatible
  Documentation: Document msm8992 qcom_scm compatible
  arm64: dts: msm8992: Add a spmi_bus node
  arm64: dts: msm8992: Add BLSP2 UART2 node
  arm64: dts: msm8992: Add a BLSP I2C2 node
  arm64: dts: msm8992: Add a BLSP I2C6 node
  arm64: dts: msm8992: Add PMU node
  arm64: dts: msm8992: Add PSCI support.
  arm64: dts: qcom: Update msm8992 pin configuration
  arm64: dts: qcom: Fix msm8992 SDHCI
  arm64: dts: qcom: Add a label to the msm8992 rpm-requests node

 .../devicetree/bindings/firmware/qcom,scm.txt |   1 +
 arch/arm64/boot/dts/qcom/msm8992-pins.dtsi    | 149 ++++++++++++----
 arch/arm64/boot/dts/qcom/msm8992.dtsi         | 167 ++++++++++++++++--
 drivers/firmware/qcom_scm.c                   |   1 +
 4 files changed, 275 insertions(+), 43 deletions(-)

-- 
2.26.2