[PATCH v3 1/4] dt-bindings: pinctrl: Document 7211 compatible for brcm,bcm2835-gpio.txt
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2020-05-31 00:11:17
Also in:
linux-arm-kernel, linux-gpio, lkml
Subsystem:
open firmware and flattened device tree bindings, pin control subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Linus Torvalds
Document the brcm,bcm7211-gpio compatible string in the brcm,bcm2835-gpio.txt document. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
index 3cab7336a326..dfc67b90591c 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt@@ -9,6 +9,7 @@ Required properties: "brcm,bcm2835-gpio" - BCM2835 compatible pinctrl "brcm,bcm7211-gpio" - BCM7211 compatible pinctrl "brcm,bcm2711-gpio" - BCM2711 compatible pinctrl + "brcm,bcm7211-gpio" - BCM7211 compatible pinctrl - reg: Should contain the physical address of the GPIO module's registers. - gpio-controller: Marks the device node as a GPIO controller. - #gpio-cells : Should be two. The first cell is the pin number and the
--
2.17.1