[PATCH v2 2/4] dt-bindings: pinctrl: Document optional BCM7211 wake-up interrupts
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2020-05-29 19:16:59
Also in:
linux-arm-kernel, linux-gpio, lkml
Subsystem:
open firmware and flattened device tree bindings, pin control subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Linus Torvalds
BCM7211 supports wake-up interrupts in the form of optional interrupt lines, one per bank, plus the "all banks" interrupt line. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- .../devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
index dfc67b90591c..5682b2010e50 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt@@ -16,7 +16,9 @@ Required properties: second cell is used to specify optional parameters: - bit 0 specifies polarity (0 for normal, 1 for inverted) - interrupts : The interrupt outputs from the controller. One interrupt per - individual bank followed by the "all banks" interrupt. + individual bank followed by the "all banks" interrupt. For BCM7211, an + additional set of per-bank interrupt line and an "all banks" wake-up + interrupt may be specified. - interrupt-controller: Marks the device node as an interrupt controller. - #interrupt-cells : Should be 2. The first cell is the GPIO number.
--
2.17.1