[PATCH v3 01/10] media: i2c: imx290: set the format before VIDIOC_SUBDEV_G_FMT is called

With the current driver 'media-ctl -p' issued right after the imx290 driver
is loaded prints:
pad0: Source
             [fmt:unknown/0x0]

The format value of zero is due to the current_format field of the imx290
struct not being initialized yet.

As imx290_entity_init_cfg() calls imx290_set_fmt(), the current_mode field
is also initialized, so the line which set current_mode to a default value
in driver's probe() function is no longer needed.

Signed-off-by: Andrey Konovalov <redacted>
Reviewed-by: Manivannan Sadhasivam <redacted>
---
 drivers/media/i2c/imx290.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index f7678e5a5d87..2d8c38ffe2f0 100644
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c

@@ -722,9 +722,6 @@ static int imx290_probe(struct i2c_client *client)
 		goto free_err;
 	}
 
-	/* Set default mode to max resolution */
-	imx290->current_mode = &imx290_modes[0];
-
 	/* get system clock (xclk) */
 	imx290->xclk = devm_clk_get(dev, "xclk");
 	if (IS_ERR(imx290->xclk)) {

@@ -809,6 +806,9 @@ static int imx290_probe(struct i2c_client *client)
 		goto free_ctrl;
 	}
 
+	/* Initialize the frame format (this also sets imx290->current_mode) */
+	imx290_entity_init_cfg(&imx290->sd, NULL);
+
 	ret = v4l2_async_register_subdev(&imx290->sd);
 	if (ret < 0) {
 		dev_err(dev, "Could not register v4l2 device\n");

-- 
2.17.1