Since commit 22d48ad7bfac ("spi: dw: Add Elkhart Lake PSE DMA support")
the spi-dw-mid.c module supports a platform DMA engine handling the DW APB
SSI controller requests. Lets alter the DW SPI bindings file to accept the
Rx and Tx DMA line specifiers.

Signed-off-by: Serge Semin <redacted>
Cc: Georgy Vlasov <redacted>
Cc: Ramil Zaripov <redacted>
Cc: Alexey Malahov <redacted>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <redacted>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Allison Randal <redacted>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Gareth Williams <redacted>
Cc: linux-mips@vger.kernel.org

---

Changelog v2:
- Revert the order of the DT changes: first add the DMA channels support,
  then perform the binding file conversion.
---
 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
index 7a4702edf896..020e3168ee41 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt

@@ -23,6 +23,8 @@ Optional properties:
 - num-cs : The number of chipselects. If omitted, this will default to 4.
 - reg-io-width : The I/O register width (in bytes) implemented by this
   device.  Supported values are 2 or 4 (the default).
+- dmas : Phandle + identifiers of Tx and Rx DMA channels.
+- dma-names : Contains the names of the DMA channels. Must be "tx" and "rx".
 
 Child nodes as per the generic SPI binding.
 

-- 
2.25.1