Nagarjuna Kristam [off-list ref] writes:

This patch series adds charger detect support on XUSB hardware used in
Tegra210 and Tegra186 SoCs.

This patchset is composed with :
 - dt bindings of XUSB Pad Controller
 - Tegra XUSB device mode driver to add vbus_draw support 
 - Tegra PHY driver for charger detect support

Tests done:
 - Connect USB cable from ubuntu host to micro-B port of DUT to detect
   SDP_TYPE charger
 - Connect USB cable from external powered USB hub(which inturn connects
   to ubuntu host) to micro-B port of DUT to detect CDP_TYPE charger.
 - Connect USB cable from USB charger to micro-B port of DUT to detect
   DCP_TYPE charger.
DUT: Jetson-tx1, Jetson tx2.

V3:
 - Added ACKed-by details for PHY driver and DT changes.
 - Functions and its arguments are aligned.
 - Tabs are used for alignment of MACRO's
 - For vbus_draw USDC callback, usb_phy set_power error is propogated.
 - Fixed various comments given by thierry.
V2:
 - Added ACKed-by details for DT patches.
 - All patches rebased.

Nagarjuna Kristam (8):
  dt-bindings: phy: tegra-xusb: Add charger-detect property
  usb: gadget: tegra-xudc: Add vbus_draw support
  phy: tegra: xusb: Add support for UTMI pad power control
  phy: tegra: xusb: Add USB2 pad power control support for Tegra210
  phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection
  phy: tegra: xusb: Add support for charger detect
  phy: tegra: xusb: Enable charger detect for Tegra186
  phy: tegra: xusb: Enable charger detect for Tegra210

Is there a hard-dependency between gadget and phy patches?

-- 
balbi