Re: [PATCH 2/3] pinctrl: mchp-sgpio: Add pinctrl driver for Microsemi Serial GPIO
From: Randy Dunlap <hidden>
Date: 2020-05-13 15:01:35
Also in:
linux-arm-kernel, linux-gpio, lkml
On 5/13/20 7:11 AM, Lars Povlsen wrote:
quoted hunk ↗ jump to hunk
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 834c59950d1cf..2b0e9021fd7e0 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig@@ -396,6 +396,23 @@ config PINCTRL_OCELOT select OF_GPIO select REGMAP_MMIO +config PINCTRL_MSCC_SGPIO + bool "Pinctrl driver for Microsemi Serial GPIO" + depends on OF + depends on HAS_IOMEM + select GPIOLIB + select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select OF_GPIO + help + Support for the VCoreIII SoC serial GPIO device. By using a
Line above should be indented with one tab + 2 spaces... like the lines below.
+ serial interface, the SIO controller significantly extends + the number of available GPIOs with a minimum number of + additional pins on the device. The primary purpose of the + SIO controller is to connect control signals from SFP + modules and to act as an LED controller. +
thanks. -- ~Randy