Re: [PATCH V2 2/3] clk: vc5: Enable addition output configurations of the Versaclock
From: Rob Herring <robh@kernel.org>
Date: 2020-05-12 22:05:41
Also in:
linux-clk, lkml
On Sat, May 02, 2020 at 07:21:25AM -0500, Adam Ford wrote:
The existing driver is expecting the Versaclock to be pre-programmed, and only sets the output frequency. Unfortunately, not all devices are pre-programmed, and the Versaclock chip has more options beyond just the frequency. This patch enables the following additional features: - Programmable voltage: 1.8V, 2.5V, or 3.3V - Slew Percentage of normal: 85%, 90%, or 100% - Output Type: LVPECL, CMOS, HCSL, or LVDS Signed-off-by: Adam Ford <redacted>
quoted hunk ↗ jump to hunk
diff --git a/include/dt-bindings/clk/versaclock.h b/include/dt-bindings/clk/versaclock.h new file mode 100644 index 000000000000..c6a6a0946564 --- /dev/null +++ b/include/dt-bindings/clk/versaclock.h
Belongs in binding patch.
quoted hunk ↗ jump to hunk
@@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* This file defines field values used by the versaclock 6 family + * for defining output type + */ + +#define VC5_LVPECL 0 +#define VC5_CMOS 1 +#define VC5_HCSL33 2 +#define VC5_LVDS 3 +#define VC5_CMOS2 4 +#define VC5_CMOSD 5 +#define VC5_HCSL25 6-- 2.25.1