[PATCH v2 17/18] ARM: dts: s5pv210: Set MAX8998 GPIO pulls on aries
From: Jonathan Bakker <hidden>
Date: 2020-05-01 23:51:52
Also in:
linux-arm-kernel, linux-samsung-soc, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Make sure that the GPIOs are configured correctly for the interrupt (otherwise it won't fire) and disable the pulls on the DVS GPIOs which are outputs. Signed-off-by: Jonathan Bakker <redacted> --- arch/arm/boot/dts/s5pv210-aries.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 0bd65401ec65..cf858029292e 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi@@ -169,6 +169,9 @@ max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>; max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_dvs_pins &pmic_irq>; + regulators { ldo2_reg: LDO2 { regulator-name = "VALIVE_1.2V";
@@ -617,6 +620,21 @@ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; }; + pmic_dvs_pins: pmic-dvs-pins { + samsung,pins = "gph0-3", "gph0-4", "gph0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-val = <0>; + }; + + pmic_irq: pmic-irq { + samsung,pins = "gph0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + wifi_host_wake: wifi-host-wake { samsung,pins = "gph2-4"; samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
--
2.20.1