Hi,

Nagarjuna Kristam [off-list ref] writes:

On 29-03-2020 16:10, Felipe Balbi wrote:

quoted

quoted

This patch series adds charger detect support on XUSB hardware used in
Tegra210 and Tegra186 SoCs.

This patchset is composed with :
  - dt bindings of XUSB Pad Controller
  - Tegra XUSB device mode driver to add vbus_draw support
  - Tegra PHY driver for charger detect support

Tests done:
  - Connect USB cable from ubuntu host to micro-B port of DUT to detect
    SDP_TYPE charger
  - Connect USB cable from external powered USB hub(which inturn connects
    to ubuntu host) to micro-B port of DUT to detect CDP_TYPE charger.
  - Connect USB cable from USB charger to micro-B port of DUT to detect
    DCP_TYPE charger.
DUT: Jetson-tx1, Jetson tx2.

Nagarjuna Kristam (8):
   dt-bindings: phy: tegra-xusb: Add charger-detect property
   usb: gadget: tegra-xudc: Add vbus_draw support
   phy: tegra: xusb: Add support for UTMI pad power control
   phy: tegra: xusb: Add USB2 pad power control support for Tegra210
   phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection
   phy: tegra: xusb: Add support for charger detect
   phy: tegra: xusb: Enable charger detect for Tegra186
   phy: tegra: xusb: Enable charger detect for Tegra210

this doesn't apply cleanly. Could you resend after -rc1 is tagged?

-- balbi

Sure, will send rebased patch once rc1 is available.

Thank you

-- 
balbi